 |
Product Description: Protecto-Shield® Prolok® Replacement Visors
Features easy attachment without snaps, posts or levers, reinforced edge to resist cracking, and universal hole pattern that allows the use of Honeywell visors with other popular manufacturers' headgear. Propionate offers superior optics and durability. Polycarbonate provides excellent impact resistance. Meets ANSI Z87.1-2003 High Impact and is certified to the requirements of CSA Z94.3.
Note: Faceshields and face screens provide secondary eye protection only and must be worn along with approved primary eye protection, such as safety glasses or goggles, in order to provide complete eye protection.
As low as: $6.50
|
 |
Product Description: Protecto-Shield® Prolok® Headgear
Tough thermoplastic headgear provides impact and splash protection and features heat-resistant browguard. Specially designed with chemical splash drip edge to prevent fluids from splashing down inside the visor. Easy sizing and tension adjustment for individual visor positioning. Easy visor attachment/replacement.
Note: Faceshields and face screens provide secondary eye protection only and must be worn along with approved primary eye protection, such as safety glasses or goggles, in order to provide complete eye protection.
As low as: $11.39
|
 |
Product Description: SWEATSOpad® Headbands
Made from absorbent, 100% fleecy cotton. Features air cushion layer, absorbs excessive perspiration and helps to minimize "helmet-head" and helmet slippage. Eliminates the frustration of wearing a helmet over a sweatband. Flame-retardant treated with hook and loop fastener. Russet.
As low as: $1.94
|
 |
Product Description: Bionic® Faceshields
Polycarbonate visor with uncoated cell foam on back of headgear and breathable, washable sweatband up front. Extended chin and top-of-head protection. Lightweight and balanced design reduces head and neck strain. Provides excellent optics, visibility, and enhanced protection from airborne debris. Ideal for workers exposed to falling or flying objects, impact, chemical splash and other debris. Dual position visors are easy to replace and attach securely. Comfortably worn with most goggles, Rx eyewear and respirators. Made in USA.
As low as: $22.41
|
 |
Product Description: Winter Liners
Winter liners are offered in a variety of styles to warm-up workers in any environment. Select the style and features which best meet your needs. Most outer fabrics and all binding are flame-retardant until washed. Linings and fasteners are flame-resistant.
As low as: $6.38
|
 |
Product Description: Doo-Hats
Doo-hats are made from 100% cotton, making them extremely comfortable and absorbent. One-size-fits-all design features rear ties that provide exact fit. Available with neck protection flap for added coverage.
As low as: $4.43
|
 |
Product Description: Sweatbands
Available in a variety of sizes and materials to suit many needs and work environments. All designs offer excellent performance and long-lasting comfort.
As low as: $2.34
|
 |
Product Description: 3-in-1 Versa Liners
Constructed of soft, warm fleece with (2) built-in warming pack ear pockets, these liners act as a neck, head and face warmer, all wrapped in one.
As low as: $14.13
|
 |
Product Description: Premium Flame-Resistant, Shoulder-Length Two-Way Winter Liner
Upper cap is FR-treated cotton/modacrylic. Lining: ATPV = 21 cal/cm², NFPA 70E HRC 2. Lower cap is 18 oz. modacrylic soft rib knit. ATPV = 28.6 cal/cm², NFPA 70E, HRC 3. Features Nomex® zipper and thread. Flame-resistant for up to 50 washings. Midnight blue. Universal size. Meets ASTM F1506.
As low as: $30.24
|
 |
Product Description: Insect Net
Attaches to most hard hats and baseball caps. Features drawstring with stopper on both ends. White. 17" W x 17" L.
As low as: $2.95
|
 |
Product Description: Value Multifunctional Gaiters
Made from 100% polyester microfiber. Offers super-stretch, seamless comfort. Can be worn 10 ways. Available in navy, khaki, skulls and tribal.
As low as: $5.98
|
 |
Product Description: Premium Flame-Resistant, Quilted Shoulder-Length Winter Liner
Outer shell is 100% FR-treated cotton. Lining is FR-treated cotton with 3M™ Thinsulate™ Platinum Insulation. Thread made of Nomex® lllA brand fiber. Flame-resistant for up to 50 washings. Blue. Universal size. Meets ASTM F1506. ATPV = 26 cal/cm², NFPA 70E HRC 3.
As low as: $23.61
|
 |
Product Description: Premium Flame-Resistant Shoulder-Length Winter Liner
Outer shell is 100% FR-treated cotton. Lining is modacrylic jersey. Thread is made of Nomex® IIIA brand fiber. Flame-resistant for up to 50 washings. Blue with red lining. Universal size. Meets ASTM F1506. ATPV = 21 cal/cm², NFPA 70E HRC 2.
As low as: $22.39
|
 |
Product Description: Classic Flame-Resistant Mid-Length Winter Liner
Made with 100% FR-treated cotton with modacrylic jersey lining. Thread made of Nomex® lllA brand fiber. Flame-resistant for up to 50 washings. Blue with red lining. Universal size. Meets ASTM F1506, ATPV = 21 cal/cm², NFPA 70E HRC 2.
As low as: $13.13
|
 |
Product Description: Vulcan® Cowboy Hard Hats
High-density polyethylene outer shell resists penetration. Features custom-curled extra wide brim for UV and rain protection plus vintage-inspired pinch-front top for authentic cowboy appeal. Water-resistant. Includes 6-point ratchet suspension. One size fits most. Complies with ANSI Z89.1-2009, Type 1, Class E, G and C. Made in USA.
As low as: $19.73
|
 |
Product Description: Baseball Cap Bump Cap
Outer poly/cotton baseball cap features high-profile, 6-panel design with top of cap holes for cooling ventilation. Inside, a separate hard plastic polyethylene shell cap insert encircles top, front and both sides of head to protect against bumps and scrapes. Foam padding enhances comfort. Bump cap insert also sold separately. One size fits all. Navy. Not ANSI compliant.
As low as: $8.32
|
 |
Product Description: Terry Toppers® Snap-On Sweatbands for Hard Hats
Constructed from 100% super-absorbent soft terry cotton and offers plush, not scratchy, texture. Sweatband absorbs without needing to be washed first. Installs easily with snap-on application and helps hard hat fit securely. No foam middle. One size fits all. Machine washable.
As low as: $1.66
|
 |
Product Description: SE-2 Sensor Hard Hats
A lateral impact activates the patented attenuator band which provides protection for the periphery of the cap. SE-2 Air-Flow design provides air circulation within shell. Exclusive smooth crown design and technically advanced SuperEight suspension with (8) load-bearing points to stabilize and balance hat during everyday wear. Meets ANSI Z89.1-2009 Type 2 Class E and CSA Z94.1-2005 Type 2 Class E.
As low as: $38.90
|
 |
Product Description: V-Gard® Value Winter Liners
Provides excellent protection against cold with maximum economy.
• V-Gard Liner Knit Cap is a stylish skullie cap that prevents liner from obstructing vision. Made from 100% high bulk acrylic.
• V-Gard Liner Knit Hat-Cap Cover is made from 100% acrylic. Bright yellow-green for greater visibility. Full face tube mounts under or over brim of MSA caps or hats, covering ears, mouth, cheeks and neck. Extended nape and wraparound collar for tucking into coat/shirt.
• V-Gard Value Liner is made of 100% cotton twill with adjustable chin strap.
• V-Gard Select Liner has 2-layers of fabric with adjustable chinstrap. Quilted flaps allow uncompromised hearing protection levels when using earmuffs. Flame-retardant to 50 washes. Water-repellent.
• Flame-Retardant V-Gard Neck Gaiter has 2-layers of fabric and elastic strip keeps gaiter comfortably snug to face or neck. Can be used with or without any V-Gard Liner for added warmth on face/neck. Flame-retardant to 50 washes. Water-repellent.
As low as: $8.23
|
 |
Product Description: V-Gard® Visors
A full line of visors for use with V-Gard chin protectors and frames. Polycarbonate is suitable for most applications where impact hazards exist. Mesh provides maximum ventilation in humid working conditions. Lightweight and durable. Does not provide impact, splash or UV protection. Nitrometer can only be used with V-Gard retractable or standard chin protector. Meets ANSI/ISEA Z87.1-2010 requirements.
As low as: $7.37
|
 |
Product Description: V-Gard® Chin Protectors
Helps provide extra protection from impact and splash hazards to face and neck. Unique retractable plates allow greater flexibility of head movement both up and down, as well as side-to-side. Accessory system kits include white V-Gard cap with ratchet suspension and V-Gard frame for slotted caps. Meets the requirements of ANSI/ISEA Z87.1-2010 when worn in conjunction with V-Gard frames and visors.
As low as: $4.12
|
 |
Product Description: V-Gard® Frames
Helmet-mounted frames for various work conditions and user helmets. Sloped design allows liquids, chips and other materials to slide off frame and away from the line of sight. Meets ANSI/ISEA Z87.1-2010 requirements.
As low as: $9.59
|
 |
Product Description: V-Gard® Standard Caps
MSA V-Gard slotted caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions (Class E).
V-Gard caps meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
As low as: $7.57
|
 |
Product Description: V-Gard® Full-Brim Hard Hats
MSA V-Gard non-slotted hats meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and CSA Z94.1-2005 with 1-Touch® and Fas-Trac® Suspensions
(Class E). V-Gard hats meet the voluntary standard for low temperature [LT] and reverse donning as prescribed by ANSI/ISEA Z89.1-2009. Look for the official reverse donning logo to determine if hard hat may
be worn backwards without voiding approvals.
As low as: $11.27
|
 |
Product Description: Replacement Suspensions for V-Gard® Caps and Hats
MSA's line of hard hat suspensions are available in a variety of sizes. Hard hat sold separately.
• The Fas-Trac® suspension is a 4-point webbed system with a large knob for easy adjustment.
• The Staz-On® suspension is a comfortable, 4-point webbed system.
• The Swing-ratchet suspension gives the user the ability to adjust the ratchet’s location without having to remove the suspension.
As low as: $9.30
|
 |
Product Description: Terri-Band Sweatbands
Custom design sweatband with plastic snaps fits all MSA helmets. Washable.
As low as: $48.24
|
 |
Product Description: Universal Visors
A variety of visors easily fit all MSA faceshield frames and assemblies. Always wear with eye protection, such as goggles or spectacles, that meet ANSI/ISEA Z87.1 requirements for High Impact. Except as noted, MSA visors meet or exceed impact requirements of ANSI/ISEA Z87.1.
Note: Headgear not included.
As low as: $6.68
|
 |
Product Description: Skullgard® Protective Hats and Caps
Feature heavy-duty construction for use in steel mills and other heavy industries where elevated temperatures are common. Natural tan. Meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class G). Also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT].
As low as: $78.21
|
 |
Product Description: Freedom Series™ V-Gard® Protective Hard Hats
Stay compliant while protecting head. Bright designs are unique, with a superior shiny finish. Come equipped with MSA's Fas-Trac® suspension and meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E). Also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning. Look for the official reverse donning logo to determine if hard hat may be worn backwards without voiding approvals.
As low as: $28.94
|
 |
Product Description: V-Gard® 500 Protective Caps
Provides cooling vents for improved air circulation and comfort. Features Glaregard® surface underbrim to reduce reflective glare, lateral contours above ear for easy hearing protection integration and rain trough that extends all the way around the brim. Meets all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C). Also meet the ANSI/ISEA Z89.1-2009 voluntary standard for low temperature [LT] and reverse donning.
As low as: $13.94
|
 |
Product Description: JACKSON SAFETY* HEAD-TURNERS* Hard Hat Series
Smooth dome design. Graphics designed to withstand temperature variances, humidity, and exposure to UV light for long-lasting wear. Features 4-point ratchet suspension. Fits head sizes 6 1/2" to 8". Meets ANSI Z89.1, Type 1, Class G, C and E.
As low as: $32.06
|
 |
Product Description: JACKSON SAFETY* BLOCKHEAD* Hard Hats
Full 360° brim protects wearer from nature's elements. Lightweight for comfort. Molded from High-Density Polyethylene (HDPE). 8-point ratchet system. Soft cloth absorbs sweat for safety and comfort. Meets ANSI Z89.1, Type 1, Class G, E and C.
As low as: $13.38
|
 |
Product Description: JACKSON SAFETY* 82-BM Metal Cap Adapter
Metal adapter mounts faceshield to any slotted cap equipped with #87 mounting blades. Brackets are designed with metal pins for quick detachment. Faceshields are secured with integral plastic lugs and can be worn bill forward or backward. Mounting blades not included.
As low as: $22.30
|
 |
Product Description: JACKSON SAFETY* Capshields
337 Capshield is a fully dielectric device for non-slotted caps. Features curved channel that fits over the bill of the cap for bill forward wear and secures with adjustable rubber headband that stretches around the exterior cap crown. Faceshields secured with integral plastic lugs.
437 Blade-mount capshield is a fully dielectric plastic attachment for slotted caps. Curved channel fits over bill of cap for bill forward wear and includes pivoting blades, which snap easily into cap slots. Faceshields secured with integral plastic lugs.
137 Capshield is a metal device for non-slotted caps. Features curved aluminum channel that fits over bill of cap for bill forward wear and secures with coiled spring that stretches around the exterior cap crown. Faceshields secured with integral plastic lugs.
As low as: $16.69
|
 |
Product Description: JACKSON SAFETY* Plastic Cap Adapters
The 82-B plastic cap adapter is fully dielectric and mounts faceshield to any slotted cap equipped with #87 mounting blades. Faceshields are secured with quick detach brackets with plastic pins and integral plastic lugs; can be worn bill forward or backward. Mounting blades not included.
The 282-B plastic cap adapter mounts faceshield on a wide variety of non-slotted caps with integral plastic lugs. Uses clips pressed over cap rim for a firm fit. Polyethylene spark deflector. Not used on caps with slots and/or rain troughs.
The 382-B plastic cap adapter is fully dielectric and mounts faceshields to slotted caps. Includes integral spark deflector and pivoting blades. Faceshields are secured with integral plastic lugs and can be used bill forward or backward.
As low as: $17.84
|
 |
Product Description: JACKSON SAFETY* 170-SB Headgear
Enables attachment of Jackson Safety* faceshields. Headgear with large spark deflector. Ratchet suspension.
As low as: $14.57
|
 |
Product Description: JACKSON SAFETY* SC-6 Hard Hats
Smooth dome design. Lightweight, molded from dielectric High-Density Polyethylene (HDPE). 4 pt. ratchet suspension. Accessory slots for attaching additional personal protection equipment. Head sizes 6 1/2" to 8". Meets ANSI Z89.1, Class C, G & E.
As low as: $11.99
|
 |
Product Description: JACKSON SAFETY* SC-16 Fiberglass Hard Hats
Fiberglass protection for higher heat applications. Smooth dome design. Firm, comfortable fit with padded, absorbent brow pad. Accessory slots for attaching additional personal protective equipment. 4-Point ratchet suspension. Head sizes 6 1/2" to 8". Meets ANSI Z89.1, Class G & C.
As low as: $26.73
|
 |
Product Description: JACKSON SAFETY* Model-H Bracket
Curved aluminum channel and coil sprint attachment allows attachment of any JACKSON SAFETY* Face Shield to protective full brim hat.
As low as: $9.40
|
 |
Product Description: JACKSON SAFETY* Model-P Brimmaster Cap Adapter
Mounts to most non-slotted caps with cap coil spring attachment. Locking device holds faceshield securely in up or down position. Turn button attachment will secure faceshield and provide fast attachment. Faceshield and hard hat sold separately.
As low as: $9.83
|
 |
Product Description: Spray Socks
Cool and comfortable hood type spray sock fits snugly over the head. Can be positioned to expose eyes, eyes and nose, or eyes, nose and mouth. 3-way stretch material. One size fits all.
As low as: $18.99
|
 |
Product Description: Roughneck® P2 Hard Hats
Made of injection-molded fiberglass compound. Solid color resin for permanent, no-chip, no-peel finish. Features smooth, matte finish for cleaner, crisper logo imprints. Impact resistance up to 500° F. Compatible with Quick-Lok® or Speedy® Loop helmet attachment system for faceshields and welding helmets. SEI Third-Party Certified. Meets ANSI-Z89.1-2009.
As low as: $24.60
|
 |
Product Description: Faceshield Hard Hat Brackets
Provides positive seal to keep debris from filtering between cap and shield. May be pivoted above cap between uses without removing the cap. Hard hat and faceshield not included.
As low as: $9.62
|
 |
Product Description: F300, F400, F500, and Dual Crown Series Faceshield Headgear
A variety of faceshield headgear with crown protectors provides the level of protection you need. All models feature lightweight and heat-resistant Noryl® crown protectors and ratchet headbands. Meet ANSI Z87. 1-2003 High Impact.
F300 lightweight faceshield headgear provides general face protection for light-duty applications. Easily fits over spectacles, leaving room for air circulation to prevent fogging. Accommodates standard size windows. 8" X 11 1/2".
F400 features a deeper 4" crown protector to extend protection without increasing weight. Incorporates wide-vision wraparound windows and screens which provide 40% more protective area than standard size faceshields. Fits easily over required spectacles or respirators. 8" X 17".
F500 includes a broader, deeper 7" crown protector to provide an extra margin of protection when harsh working conditions require it. Features the exclusive Channel Grip System that mounts wide, wraparound windows and locks them into place to form a perfect seal from dust, dirt and debris. Includes Fibre-Metal classic 3-C, free-floating headgear.
As low as: $13.49
|
 |
Product Description: Faceshield Headgear Combinations
Protective cap-mounting mechanisms easily and safely secure Fibre-Metal® faceshields to hard hats. Constructed from Noryl®, these faceshield brackets offer durable protection. Model 4000 with Quick-Lok® cups is for mounting on Fibre-Metal caps equipped with Quick-Lok® blocks for more permanent mounting. Model 5000 with Speedy® mounting loops is adjustable and provides easy on and off mounting on protective caps.
As low as: $13.78
|
 |
Product Description: SuperEight® Hats and Caps
High-quality thermoplastic hats and caps feature unique, smooth crown that eliminates the danger of falling objects being trapped by ribs, ridges or slots. Wearers can adjust head size by using rear-located ratchet mechanism and tilting the headband. All hats and caps include 8-point suspension and available with Fibre-Metal non-slip/non-strip ratchet, SwingStrap™ or TabLok™ headgear. All styles are SEI certified to meet ANSI Z89.1-2009, Type 1, Class, E, G and C.
Note: Available in a variety of colors. E2 cap is compatible with Quick-Lok® or Speedy® Loop helmet attachment system for faceshields and welding helmets.
As low as: $16.67
|
 |
Product Description: High-Performance Faceshield Windows
Windows are preformed to the exact curve of crown protectors for easy installation, exact fit and perfect seal against dust, dirt and debris. They are .060" thick, yet cost no more than ordinary .040" thick windows. Easily fit over required protective spectacles or respirators. Hard hat and frame not included.
As low as: $4.42
|
 |
Product Description: JACKSON SAFETY* Faceshields
Acetate: Robust combination of weight and strength. Excellent cold flexibility.
Polycarbonate: Impact performance. Good performance against heat. Excellent cold flexibility.
Propionate: Lightweight.
Wire Mesh: Wear with faceshield to dissipate heat. Ideal for flying debris applications. Air flow for comfort. Headgear sold separately. Meets ANSI Z87.1 2010 Standards.
As low as: $12.03
|
 |
Product Description: Headgear Brackets and Faceshields
Headgear features locking cams which eliminate snaps and lower replacement costs. Aluminum rim headgear bracket (102) features a 5-system cam lock for added impact resistance. Constructed from ABS material and a crown made of nylon 66. All headgear accepts most manufacturers’ universally punched windows and meets ANSI Z87.1-2003 High Impact. For use as secondary protection only. Faceshields sold separately.
As low as: $5.97
|
 |
Product Description: Model S61 Hard Hats
Features lightweight, high-density polyethylene construction and low-profile, rounded front design. The 4-point suspension includes cotton brow pad and Flex-Gear® ratchet size adjustment. Meets ANSI/ISEA Z89.1-2009, Type 1, Class E and G. Custom logo printing available.
As low as: $11.19
|
 |
Product Description: Model S51 Hard Hats
Flat front, trim profile shell design combines a perfect fit with a look that workers prefer. Features rain trough and poly brow pad for comfort. Lightweight, high-density, polyethylene construction for durability. Available with 4-point suspension with self-sizing pinlock or Flex-Gear® ratchet size adjustment. Meets ANSI/ISEA Z89.1-2009, Type I, Class E & G and CSA Z94.1-2005, Type 1, Class E & G. Custom logo printing available.
As low as: $6.42
|
 |
Product Description: Replacement Brow Pads
Brow pads cushion while absorbing moisture to keep wearers feeling cool and clean. Replaceable on all Standard and Classic Series hard hats. Velcro® easily in place over original pads, ensuring comfort and protection. RBPCOTTON is a large, absorbent cotton replacement pad. RBPCOOL replacement brow pad is made of Polartec® wicking material that moves sweat away from the worker’s brow. All styles fit all current Bullard® hard hats.
As low as: $5.16
|
 |
Product Description: Classic Series Hard Hats
Designed with a wide profile which offers heightened protection from elements, including UV rays. Standard 1" (2.54 cm) wide seamless nylon straps increase balance and comfort. Features 6-point, Flex-Gear® suspension with ratchet adjustment. Custom logo printing available. Meets ANSI/ISEA Z89.1-2009, Type I, Class E and G and CSA Z94.1-2005, Type, 1, Class E & G.
As low as: $15.24
|
 |
Product Description: Bump Caps
Offers wearers a sleek style combined with user comfort and maximum versatility. Provides protection against minor bumps, bruises and lacerations. Features double hoop design for greater reinforcement and durability along with an easy-to-assemble user replaceable suspension. Lightweight, high-density polyethylene. Interchangeable brow pad available in easy-to-clean vinyl and absorbent poly for comfortable fit. Other colors are available. Custom logo printing available.
As low as: $4.34
|
 |
Product Description: Tritan™ Visor
Designed to help provide protection to the face from many hazards. Made from Tritan copolyester. Impact- and chemical-resistant. Conforms to ANSI/ISEA Z87.1-2010 Basic and High Impact for faceshields.
As low as: $4.78
|
 |
Product Description: Visors
Flat acetate is for chemical applications and light impact protection. Heat-formed polycarbonate is for high-heat applications with little or no exposure to chemicals. Standard package is 50/carton, sold individually. Meets ANSI/ISEA Z87.1-2010 Basic and High Impact
As low as: $4.23
|
 |
Product Description: Dielectric Faceshield Brackets
Constructed from lightweight, durable nylon and are suited for general-duty applications. Front-mounting. Visors sold separately. Standard package is 50/carton, sold individually. Meets ANSI Z87.1-2010.
As low as: $13.99
|
 |
Product Description: Faceshield Bracket
Gold Line® bracket is made from resilient, gold-anodized aluminum. Resists corrosion and heat, making it ideal for chemical handling and high-heat industrial applications. Front-mounting. Fits cap models C30, S51, S61, bump cap S62 and 911C.
As low as: $10.06
|
 |
Product Description: 3M™ H8A Deluxe Ratchet Headgear
Five-position crown strap with ratchet adjustment offers comfortable, snug fit. No snaps, caps or bands. High-strength thermoplastic crown provides impact resistance over a wide range of temperatures. Easy-Change feature allows for quick faceshield replacement. Meets the High Impact requirements of ANSI Z87.1-2003.
WARNING: All faceshields must be worn with safety glasses or safety goggles.
As low as: $11.79
|
 |
Product Description: 3M™ Realtree™ Hardwoods™ High-Density Camouflage Hard Hat
Made from unique pattern transfer process, this design offers "life-like" reproduction of natural foliage. Features high-density, polyethylene shell, UV protective finish, cushioned/vented headband, and 4-point ratchet suspension. Meets the requirements of ANSI Z89.1-2003 Type 1 Class C, G and E.
As low as: $32.14
|
 |
Product Description: 3M™ HCP-8 Headgear with Chin Protector
Features 5-position crown strap and adjustable ratchet suspension. Floating window suspension helps distribute weight and reduces the shock of impact. Faceshield sold separately. Meets the requirements of ANSI Z87.1-2003.
WARNING: All faceshields must be worn with safety glasses or safety goggles.
As low as: $16.28
|
 |
Product Description: JACKSON SAFETY* Model K Headgear
Ratchet headgear with spark deflector. Soft, absorbent, wraparound, foam-cushioned sweatband gently hugs the natural shape of the head.
As low as: $9.53
|
 |
Product Description: 3M™ Faceshields
Polycarbonate faceshields help provide good heat resistance and high impact face protection. Faceshield mounts quickly to any 3M™ Headgear without tools, snaps or cams. WP96C features dark green color for high glare reduction. Non-infrared absorbing. Meets the High Impact requirements of ANSI Z87.1-2003.
WARNING: All faceshields must be worn with safety glasses or safety goggles. Meets the High Impact requirements of ANSI Z87.1-2003.
As low as: $5.40
|
|
Head and Face Safety Equipment like 3M™ Faceshields right here at King Operator. Ensure you get the best, and purchase 3M™ Faceshields from KingOSafety.com today.
|
